Infrastructure
| NAME | PURPOSE | QUANTITY |
| Fluke 17B+ | To measure and see the value of current and voltage | 4 |
| Fluke 17B | To measure and see the value of current and voltage | 1 |
| Fluke 107 | To measure and see the value of current and voltage | 2 |
| Aplab DC regulated power supply L3210 | To provide dc power supply to the boards for testing. | 2 |
| Aplab DC regulated power supply L6410 | 1 | |
| Aplab DC regulated power supply L3220 | 1 | |
| Aplab DC regulated power supply L1282 | 1 | |
| Aplab DC regulated power supply L6405 | 1 | |
| UNI-T digital storage oscilloscope UTD2062C | To check Ripple. | 1 |
| Variable Registance Machine(KDP) | To measure the load. | 2 |
| Fault testing zig(KDP) | To identify the board fault if any. | 1 |
| Final testing zig(KDP) | To prepare the board report. | 1 |
| Wave soldering Machine | To Soldering the pcb boards. | 2 |
| Hot Chamber | To cleare the mostirizer from the components and to lackaring the board. | 6 |
| Cold Chamber | To checking the temparature tollerence of the components. | 2 |
| Ultra sonic Cleaner | To clean the board with ultrasonic wave. | 4 |
| Auto gluning machine(KDP) | To Paste glue on the board. | 1 |
| Motor screw driver | To tight the screw. | 6 |
| Air Compessor | To provide the supply of highly crompessed air | 3 |
| Maxima S1120 | For Winding the transformer wire. | 2 |
| Maxima S2120 | For Winding the transformer wire with double spindle. | 1 |
| HTC MO-5000 | For measuring the micro ohms. | 2 |
| Kusam-Meco KM-454 | To measure LCR & QDR value. | 1 |
| Aplab 4910 | To measure LCR. | 1 |
| Regenato RTF 2C | To creamping the wire. | 1 |
| Regenato BW882D | To cut and stripping wire. | 1 |
| Solder pot | To solder the wires or other components. | 2 |
| MOV Cutting Machine | To cut the MOV. | 1 |
| Registance Cutting Machine. | To Cut the Registance. | 3 |
| HD Magnifying glass | For detailed visual checking. | 1 |
| Co2 lazer Machine | To cutting the accrealic sheet and other materials. | 1 |
| Printing lazer Machine |
To print on pcb or anything. | 1 |
| Miler & Capacitor cutting Machine | To cut the miler & capacitor. | 1 |
| Hot air gun | To dry printing screen and to attached slepings to the wire. | 3 |
| Zebra ZD230 | Bar code & Sticker printer | 1 |
| NTPL(KDPMC040) | High voltage breakdown tester | 1 |
| Rish insu-20 | Insulation tester | 1 |
| INNOVA(I-63C) | To measure the micro ohms | 1 |
| Elmerks pressure gage | To check relay spring preassure. | 3 |
| Kusam-Meco KM117A | To measure thickness | 1 |
| Pickup drop test pannel(KDP) | To ckeck realy pickup and realease voltage | 7 |
| Contact Registance test meter(KDP) | To ensure that realy contact registance is ok. | 4 |
| High voltage and insulation test pannel(KDP) | To check the insulation of the really | 1 |
| Ac immunity test pannel(KDP) | It is used to ensure that the AC power supply will not operate the really | 2 |
| Non-overlapping bridging test pannel(KDP) | For bridge testing of realy. | 3 |
| Auto test setup with auto record and print facility(KDP) | To ckheck realy pickup & drop, contact registance,coil opearating voltageand report printing. | 1 |
| Flusher(KDP) | To clean the realy contacts | 1 |
| Gwinstick GDM8342 | To measure and see the value of current and voltage with 50000 counts | 1 |
| Gwinstick GDS1102B | To measure frequency and ripple | 1 |
| BAKU 850 | SMD rework station | 1 |
| Ender3D | 3D printer | 1 |
| Pcb cnc machine 3420(KDP) | For prototype pcb drilling, routing and edge profiling. | 1 |
| YOKOGAWA AQ1000 OTDR | To measuring the fiber loss and distance. | 1 |
| Optical power meter VTC830 | For measuring the optical power loss. | 1 |
| Visual Fault locator | To identify the lekage of the fiber. | 1 |